Products for electrostatic gun and friction gun spraying are available separately.

Provide high gloss (above 86%), glossy (76-85%), semi-gloss (50-75%), matt (20-50%) and matt (below 20%) products. The gloss can also be controlled according to the needs of the user.

specific gravity：1.1-1.8（Varies by color）

Particle size distribution：100%less than100microns（Can be adjusted according to the special requirements of painting）

fluidity：120-140

This powder coating is a non-toxic product, but inhalation of dust should be avoided during use. It is recommended that operators wear appropriate dust masks and glasses. If possible, try to avoid prolonged skin contact with powder coating.

Store in a ventilated, dry and clean room below 28°C, keep away from fire, heating, avoid direct sunlight, and strictly prohibit open-air stacking. The powder is stable in storage for 12 months under these conditions. If the storage period is exceeded, re-inspection can be carried out. If the result meets the requirements, it can still be used.

 200℃（Workpiece temperature）    10-20minute

This technical data is only for user's reference. The specific indicators are obtained under certain conditions and represent the characteristics of this series of typical products.