High temperature resistant powder coatings can be used for high temperature heating pipes, radiators, barbecue grills, high-power lighting, automobile exhaust pipes and aviation equipment, etc., and can provide powder coatings with different temperature resistance from 200 degrees to 500 degrees according to the needs of users.

Can provide high temperature heat resistance 230℃ for 6 hours, 250℃ for 3 hours, 300℃ for 2 hours, etc. Customers can choose according to different requirements.

specific gravity：1.4-1.7（25℃.g/cm³）

Particle size distribution：100% less than 125 microns (can be adjusted according to the special requirements of coating)

fluidity：120-140nm

curing conditions：230℃/15min (workpiece temperature)

Utilization：8-12 square meters/kg, film thickness 60 microns (calculated at 100% powder coating usage rate)

transportation：Non-dangerous goods, suitable for various transportation methods, avoid prolonged direct sunlight, avoid water, oil and other chemical contamination

This powder coating is a non-toxic product, but inhalation of dust should be avoided during use. It is recommended that operators wear appropriate dust masks and glasses. If possible, try to avoid prolonged skin contact with powder coating.

Store in a ventilated, dry and clean room below 25°C, keep away from fire, heating, avoid direct sunlight, and strictly prohibit open-air stacking. The powder is stable in storage for 12 months under these conditions. If the storage period is exceeded, re-inspection can be carried out. If the result meets the requirements, it can still be used.

This technical information is for user's reference only, and the specific indicators are obtained by testing under certain conditions.