Widely used in the coating of various high-grade metal products. Typical uses: painting of electrical control cabinets, security doors, fitness equipment, metal furniture, ceilings and branded clothing hangers.

Products with various effects such as sand grain, hammer grain, silk grain, marble grain and metal appearance can be provided.

A variety of glossy products can be provided according to the needs of users. (We do not recommend using a gloss meter to measure the gloss of fine art coatings)

specific gravity：1.2-1.8（Varies by color and gloss）

Particle size distribution：100% is less than 100 microns (the specific index depends on the artistic effect, and can be adjusted according to the special requirements of painting)

fluidity：120-140

This powder coating is a non-toxic product, but inhalation of dust should be avoided during use. It is recommended that operators wear appropriate dust masks and glasses. If possible, try to avoid prolonged skin contact with powder coating.

Store in a ventilated, dry and clean room below 28°C, keep away from fire, heating, avoid direct sunlight, and strictly prohibit open-air stacking. The powder is stable in storage for 12 months under these conditions. If the storage period is exceeded, re-inspection can be carried out. If the result meets the requirements, it can still be used.

This technical information is for user reference only, and the specific indicators are obtained under certain conditions and represent the characteristics of this series of products.